worm reduction
\nOur regular 700 Series – the heart of EP acceleration reducer products – has been serving industry reliably for over a decade. Its proven modular design has set the sector standard for overall performance and is the most imitated product in the current worm gear acceleration reducer marketplace. But why settle for a knock-off when you can have the original – from EP.
\nSpecifications
\n11 basic one reduction sizes
\n8 basic dual reduction sizes
\n1\/6 – 25 HP
\n5:1 – 100:1 ratios single reduction
\n100:1 – 3600:1 ratios double reduction
\nNon-flanged, NEMA C-face quill, and coupled input styles
\nProjecting and hollow output shafts
\nProjecting diameters from 1\/2″ to 2-1\/4″
\nHollow output bore diameters from 5\/8″ to 3-7\/16″ (with over 20 bore sizes in share)
\nProduct Features
\nThe 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for much longer operating life.
\nIts multi-position mounting flexibility allows for installation in practically any position.
\nHousings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
\nInternal baffles assure positive, leak-free venting.
\nThe 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, in addition to greater precision during worm and gear alignment.
\nEP 700 Series high-strength bronze worm gear is straddle mounted somewhere between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
\nOur 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
\nPipe plugs allow convenient fill, level, and drain in any mounting position.
\nThe 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
\nBoth 2D and 3D CAD drawings are available in our eCatalog.
\nEP worm gearboxes possess earned a popularity to be an industry benchmark worldwide. Our achievement originated from our relentless drive for quality with state-of-the-artwork technology, all while offering worm gearboxes happen to be affordable prices. High versatility accorded through a wide choice of mounting choices, shaft configurations and engine interfaces, makes the EP worm gearbox the default decision for the industry. The helical-worm and the double-worm edition, with or without the torque limiter, soon add up to the advantage, creating a highly versatile drive system.
\nEP Worm gearboxes provide huge torque with low speed gear ratio. Being basic and compact in design, these gears can achieve higher gear ratio compared to the helical gears. These worm reduction gears having screw type characteristics are similar to helical gears, but its helix angle is typically comparatively bigger) and its own body is normally quite lengthy in the axial direction. The gears in these gearboxes could be proper or left-handed dependant on the purpose.
\nMounting option include universal housing, part flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (solitary or dual), with torque arm or torque limiter.
\nWorm reduction gears features
\nPrinciples
\nA worm gear is a kind of interlocking gear made up of a worm shaft and worm wheel. The worm is usually shaped just like a screw and the worm wheel is usually a type of gear machined to own a tooth account with the same configuration.
\nThe operation of a worm gear is comparable with that of a bolt and nut. The principle is equivalent to a nut that is fixed so that it cannot rotate and therefore progresses in the axial direction when the bolt is usually turned.
\nThe look of a worm gear is thought of through the relationship between your rack and spur gear on the center plane of the worm wheel.
\nFeatures
\nLarge reduction ratio\tOne rotation of the worm rotates the worm wheel by one tooth. Due to this, in a 1 speed reduction gears, the wheel can be manufactured thus that it will be rotated 1\/60 (1\/120 in special applications).
\nOrthogonal shaft\tThe shafts are aligned orthogonally because of the structure. This feature can help you layout the turning tranny direction at the right angle.
\nThe arbitrariness of the rotation direction\tThe screw direction of the worm could be clockwise or counterclockwise (generally clockwise). It is possible to transformation the rotation direction of the worm wheel by changing the screw path.
\nA wide variety of shaft layouts\tThe wide selection of shaft layouts is one of the features of interlocking gears.For instance, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Physique 2) and, if attachment orientations are included, you’ll be able to pick from over 40 layouts.
\nLow noise, low vibration\tThe interlocking of the worm and worm wheel can be characteristic since the contact is usually linear and the relative slide is fantastic. In comparison to rolling power transmission, sound and vibration are really low. For this reason, this technology is used to drive medical devices, elevators and escalators, etc.
\nThe principal specifications of worm reduction gears
\nMA Series(Small)
\nCenter distance(mm)\t32,40
\nReduction ratio\t10,20,30,40,50,60
\nInput capacity(kW)\t0.1\uff5e1(at an input of 1800 rpm)
\nOutput torque(N\u30fbm)\t20\uff5e66
\nInput speed(rpm)\t0\uff5e1800
\nMA Series(Medium)
\nCenter distance(mm)\t50,63,80,100,125,140,160
\nReduction ratio\t10,15,20,25,30,40,50,60
\nInput capacity(kW)\t0.4\uff5e30(at an input of 1800 rpm)
\nOutput torque(N\u30fbm)\t900\uff5e3570
\nInput speed(rpm)\t0\uff5e1800
\nS Series
\nCenter distance(mm)\t50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
\nReduction ratio\t10,15,20,25,30,40,50,60
\nInput capacity(kW)\t0.3\uff5e255(at an input of 1800 rpm)
\nOutput torque(N\u30fbm)\t50\uff5e56600
\nInput speed(rpm)\t0\uff5e1800
\nKey points when selecting a worm reduction gears
\nAuswahl
\nWhen choosing a worm reduction gears, the procedures for selecting the right gear are described in the manufacturer catalogs and the series and models ought to be selected according to those procedures. Particular care should be taken in important areas such as selecting the load index, calculating the overhang load and examining the heat rated capacity from the manufacturer.
\nCautions during use
\nWhen using a worm decrease gears, heat produced during the initial period of use is large and running-in operation at 1\/4, 1\/2 and 3\/4 of rated torque for eight hour periods is key to sufficiently achieving the performance of the worm decrease gears.
\nMaintenance and inspection
\nAfter completing running-in operation (approximately 50 hours), it’s important to improve the lubricating oil and also to change the lubricating oil after that about 1 time each year according to the procedure manual supplied by the manufacturer.
\nProduct Description
\nThe Worm Decrease Gear Box is supplied by our company is of supreme quality. Our products are made by using premium quality material and progress technology at our vendors end. They are widely used in various sectors. Our goods are easily available at an extremely low market prices.
\nMotor Mount Frame Options
\nTEC Motors, worm reduction gearbox.
\nOption A-160 B5 Body, Flange Mount.
\nOption B-132 B14 Frame, Face Mount.
\nOption C-100\/112 B5 Frame, Flange Attach.
\nHigh efficiency and safe operation. High load capability and overload functions. Result Torque = (Power (kW) x 9550 (Regular))\/ Gearbox result speed (rpm).
\nHigher ratios available on request reliant on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
\nDESCRIPTION
\nWormgears of the VF series are milestones for the market worldwide. They succeeded in merging uncompromising top quality with stateoftheart technology amd renown cost effectiveness.Absolute flexibility is distributed by the wide choice of several installation options, shaft configurations and motor interface, all offered as regular. The helicalworm and the doubleworm edition, with or without the torque limiter, also add up, creating a highly versatile drive system.
\nADDITIONAL INFORMATION
\nAMP
\n0.42 A
\nEFFICIENCY
\n84%
\nHP
\n0.12
\nKW
\n0.09
\nRATIO
\n7
\nRPM
\n200
\nTEMPERATURE RATING
\n20 degree C TO 80 level C
\nTORQUE
\n4 Nm
\nHSN
\n8483.40.00
\nWARRANTY PERIOD
\n12 Months
\nThe worm reduction gears can be found in two series: X and H.
\nThe series X, having a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
\nVersion XF (bell casing + coupling) provides great versatility to suit a broad selection of applications and provides higher efficiency compared to the compact collection XC, where in fact the emphasis is on space performance.
\nSeries H supplies the same features because series X with an added plus: a spur equipment pre-stage at the input end provides higher functionality and a good broader selection of ratios than the X series.
\nBody sizes 110 and 90 include a cast-iron casing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy metal and ground-finished.
\nThe worm wheel includes a cast iron hub with cast bronze insert. Hollow output shaft comes as standard.
\nBroad range of options available:
\nsecond input, output flange, single or dual extension output shaft, torque limiter with through cable connection, torque arm.<\/p>","protected":false},"excerpt":{"rendered":"
worm reduction Our regular 700 Series – the heart of EP acceleration reducer products – has been serving industry reliably for over a decade. Its proven modular design has set the sector standard for overall performance and is the most imitated product in the current worm gear acceleration reducer marketplace. But why settle for a […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":true,"template":"","format":"status","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-1115","post","type-post","status-publish","format-status","hentry","category-wormreducers","post_format-post-format-status"],"_links":{"self":[{"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/posts\/1115","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/comments?post=1115"}],"version-history":[{"count":1,"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/posts\/1115\/revisions"}],"predecessor-version":[{"id":1116,"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/posts\/1115\/revisions\/1116"}],"wp:attachment":[{"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/media?parent=1115"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/categories?post=1115"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wormreducers.xyz\/de\/wp-json\/wp\/v2\/tags?post=1115"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}