Features
Wide variety of servo gearboxes, designed to fit virtually all servo motors found on the market
Designed for the best torsional stiffness and the cheapest angular backlash, to get the utmost torque and overhung loads
Bush with slots and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The correct technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and non-standard designs.
Catalogs:
Servo equipment reducers (worm, coaxial, helical and bevel helical devices) Catalog SR
Operating instructions:
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is pleased to announce the expansion of our range of Servo Reducers, today offering five degrees of precision to meet any application requirements. The five degrees of precision obtainable allows a machine designer to select the required reducer precision to meet up their requirements and their spending budget. They are available in both in-line and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Common applications for these reducers include rotary & linear axis drives, and material handling axis drives. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The mounting faces of the HT, HP, Electronic and B versions are identical, making it possible to interchange a unit with a higher or lower accuracy unit if needed.
A wide range of engine couplings and mounting flanges are available for the complete reducer range to attach virtually any servo motor and the hollow bore output can be utilized to install output shafts, pinion shafts, or other drive elements.
These reducers are typically selected predicated on the peak cycle forces, which usually happen during accelerations and decelerations. These cycle forces depend on the powered load, the velocity vs. time profile for the cycle, and any other external forces functioning on the axis. For more selection details, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. The application details will be reviewed by our engineers, who’ll recommend the best solution for the application.
EP Inc. offers a full range of modular servo gearboxes \/worm reducers. The modular design allows for configurations with motor input flange and result pinion for rack and pinion drives, along with solid result shafts, Hollow bore result, and insight shafts for all other positioning applications. The modular design allows for universal mounting of the gearbox in virtually any orientation.
They can be utilized on motors with a NEMA23 standard flange through an adaptor kit. As the gears are naturally angled, they lead to a short total amount of the engine and its gear.
The series may also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be built on the gear’s output side.
Built with a simple and robust style, the series offers gearing ratios that range between 6:1 to 75:1. An individual may also customize the materials through the order, so as to match the gear to its intended app.
The Precision Planetary Gears of the EPRG series contains a comprehensive range of low backlash planetary gearboxes, with up to class 3′ precision, available in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with double shaft, right position shaft and right angle output, as well as a full selection of adapters for electric motor mounting, making them capable of meeting certain requirements of actually the most varied applications. They are made for make use of with built-in servo and stepper EP motors, mounted straight or via adaptor flanges, but can also be used with other EP engine types. This range of products is based on years of encounter and represents the end result of a decade-long study aimed at improving performance.
Maximum precision and dynamics, coupled with extraordinary torque density, will be the key requirements specified for reliable servo gearboxes used. EP provides servo gearboxes for any program and any performance range. Our low-backlash planetary and right-angle gearboxes reflect our passion for development and the highest levels of precision.
Worm equipment reducers provide market advance solution with efficiency and flexibility. Low number of basic models could be applied to an array of power ratings guaranteeing best performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are created for high-performance mechanical equipment. When the motor rate needs to be reduced, the output torque boosts and send torque totally to the application form. We believe that clients will appreciate our equipment reducer to accomplish their demand. Just check out EP, you can find more information about servo gearheads, servo gearboxes, and gear reducers. We always keep in the years ahead for your support.
Plug the Quickness Reducer in to the desired channel of your receiver, and connect the lead from your own servo (or servo wye) into the male servo lead from the circuit plank. The set screw on the blue trim pot, located close to the top of the primary circuit board, is used to control the velocity of the servo. Switch the set screw completely clockwise (CW) for regular servo speed with no speed reduction, completely counter-clockwise (CCW) for maximum speed reduction, or anywhere in between for partial quickness reduction. The reddish colored LED indicates three feasible conditions: Slower Blinking = No Transmission; Solid On = No Velocity Decrease; Fast Blinking = Reduced Quickness Setting
Please note that if you make any change to the speed setting as the receiver is on, you need to cycle power to the receiver (change if off and back on) for the new speed establishing to take effect. This circuit can also be used in conjunction with our Servo Reverser to trigger flap or retract servos to carefully turn in opposite directions for correct function. Guidelines are included for easy installation and use.
IMPORTANT NOTE: This device will only focus on a regular, proportional servo. It will NOT work on a retract-type servo, as they do not recognize any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, also by a transmitter which includes this function, as their style and electronics don’t allow it. Verify the FAQ page for more information.
This device will reduce the speed of any regular, proportional servo. Connect it in the middle of your receiver and the servo (or servos) you wish to control for a far more scale-like motion of flaps or retracts. Adjustable, it could be set to reduce the speed of your servo from super-slow motion to no speed reduction at all, with an almost infinite number of positions in between. Maximum reduction time for a servo to visit 90 degrees is about 14 seconds, minimum period (no reduction) is merely the normal velocity of the servo. Great for reducing or removing the tendency of a plane to “balloon up” when flaps are deployed. It can be utilized to control more than one servo by utilization of a normal servo Y.
This is the new regulated version that can be utilized on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad\/Ni-MH batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po\/Li-Ion\/LiFE batteries. This unit won’t reduce the voltage going to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as for example packaging machines, gantries, injection molding devices, pick and place, and linear slides.Offered in concentric shaft, right angle solid shaft, and correct angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to easily mount to any manufacturer’s servo
![\"\"](\"http:\/\/wormreducer.xyz\/wp-content\/uploads\/2020\/02\/download.jpg\" "\\"\\"")
engine. The EP Series helical gears possess slanted teeth compared to spur gears with straight cut teeth, making a smoother equipment mesh, yielding considerably lower noise levels.The low backlash EP planetary servo gear units are designed for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the greatest possible flexibility and cost-efficiency because not every application requires high-performance components.
They provide a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units are available in the following versions:
PSC = B5 output, smooth output shaft
PSKC = B5 output, with keyway
PSCZ = B14, output, smooth output shaft
PSKCZ = B14 output, with keyway<\/p>\n