Worm drive gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 motor. Ideal applications where an easy to fit, high torque result is required. Ideal for student based projects which includes robots and buggies.
The machine has been designed so that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The motor is snap installed into its cradle to activate the gear and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and other applications where great torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them ideal candidates for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, actually at suprisingly low voltages. We advise that you utilize stall-detection sensors, or just see your robot, to ensure that it doesn’t stall for lots of seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on small threaded end of the shaft, though it is not specifically designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors arranged new requirements for reliability, performance and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration right now and a really future proof answer. The Ever-Power gear electric motor offers total versatility in mounting choices includes shaft, base, face, and flange alternatives. The engine terminal box can be mounted in substitute positions rotated in 90º steps around the electric motor frame offering for unparalleled integration options.
Ever-Power gear motors comply with North American and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total option for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be utilized outside or in wet and dusty environments without the utilization of additional enclosures. Complete rated output is offered by the output shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the answer for applications requiring a good corner turn, optional dual result, or perhaps an inability for the motor to be back driven. The DC right angle equipment motors are made for constant and intermittent duty procedure. Our right angle equipment reducers were created with a number of mounting plate choices, making them ideal for a number of DC engine based applications. You can expect 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a small package size. Worm Equipment Motors are excellent for applications that want a self- locking or breaking characteristic since the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision minimize gears, voltages and sizes, EP Products includes a DC Worm Gear Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Devices / Security Gates / Dental Chair / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Items will work with you to create and manufacture a Worm Gear Engine that will optimize the efficiency of your unique application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Lower / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for sturdiness and a higher torque output. Due to the special mechanical framework of the worm travel the motor output shaft is certainly self locking and can not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and can attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially display their power in applications where superior gear ratios are necessary. Our worm geared motors are for that reason optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors could be quickly and efficiently adapted to satisfy your needs.
Worm gear units impress with their superior power density and small design. If required, we are able to also supply them with the impressive nsd tupH surface treatment.
In addition to the basic EP casing, we offer an extensive type of bolt-on parts to customize the product including torque arms, shaft addresses and output flanges. These could be easily field installed, but we may also be pleased to assemble the average person components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear units feature a soft, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product ideally suited for harsh and demanding industries like food processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides distinct fixing possibilities and enable an easy assembling for the client.
Other drive configurationscan be created by use of built-about accessories (e.g. torque arm and output flanges). The housings are created in light weight construction out of aluminium die cast. Motor attachment is realised generally by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Get Gearbox with Engine – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm huge, 40mm high, a robust worm get gearbox powered by an MM28 motor (included), most suitable for applications where an easy to match, high torque result is necessary, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most ideal for applications where an easy to match, high torque outcome is required
Perfect for student based tasks including robots and buggies
Reversible Substantial torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Great torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The engine is Gear DC engine with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that’s, in the case of motor without electric, the end result axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s engine is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely an improved option compared to the spur gear motor. How come worm gear so particular? Take a look wiki out: Worm Travel.
“Unlike with ordinary equipment trains, the path of transmission (input shaft vs result shaft) isn’t reversible when working with large reduction ratios, due to the higher friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm is used. This can be an advantage when it is desired to remove any possibility of the result driving the input.”
In other phrases, it is challenging to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Would you like to improve your understanding regarding worm motor?